Philips SLV3100 Video Extender Wireless Video Sender, with Infra-Red ControlShare your satellite and subscription TV channels without wires
Watch your TV programmes wirelessly on your second TV. You can choose between two devices at the touch of a button and don't have to swap cables.
The easy way to switch between any two devices without having to reconfigure your entire home cinema set-up. The wireless TV link has two separate inputs, each with its own SCART connector, enabling you to connect two A/V source devices at the same time.
The wireless link uses standard SCART and cinch plugs that are used by almost every brand of audio/video devices. If you device has one of these standard connectors it works with the wireless link.
Extend your possibilities for viewing movies, sports events, live performances and a range of TV channels anywhere in your home. The wireless TV link is suitable for transmission of AV content of all brands of PayTV and Pay-per-View decoders, satellite receivers, set-top boxes, DVD players, VCRs and camcorders.
If you store your audio/video devices in a cabinet, you cannot operate these devices with a normal IR remote control. The Philips wireless remote control link allows you to operate these devices with the cabinet doors closed thanks to an RF-based link that picks up the infrared signals of a remote control and translates them into RF. The receiver unit then translates them back to IR.
There's no need to buy or rent duplicate A/V equipment. The wireless RF system extends your possibilities for viewing DVD movies and your favourite Satellite or TV channels anywhere in your home. With a range of up to 30 meters inside the house, it delivers high-quality video and stereo audio no matter where your second TV is located.
You can record any A/V input source - regardless of what you are watching on your main TV or on your second TV - thanks to this record function. You simply instruct the transmitter box which device should be recorded on your VCR or DVD Recorder.
A 2.4 GHz wireless link between the receiver and transmitter means you don't have to lay cables or drill holes through walls.
SPECIFICATION
|
Tuner / Reception / Transmission |
|
Antenna location : Picture & sound: Internal, RC extender: Internal |
|
TV system : PAL, SECAM |
|
Typical range indoor : 15-30 m |
|
Typical range outdoor : 100 m |
|
Supported IR carrier frequency : 32-40 KHz |
|
Frequency range : picture and sound: 2.4 GHz RC extender: 433 MHz MHz |
|
Remote control extender : Yes |
|
|
|
Accessories |
|
AC/DC adaptor : 2x 9VDC, 300mA |
|
SCART duplicator : on SCART input cable |
|
|
|
Dimensions |
|
Receiver depth : 91 mm |
|
Receiver height : 41 mm |
|
Receiver Width : 144 mm |
|
Temperature (operation) : +5ºC to +35ºC |
|
Transmitter depth : 91 mm |
|
Transmitter height : 41 mm |
|
Transmitter width : 144 mm |
|
|
|
Power |
|
Power consumption : 7 W |
|
Power supply : AC/DC Adapter, 220-240V |
|
|
|
Receiver |
|
SCART out : CVBS out, Audio L+R out |
|
|
|
Transmitter |
|
SCART 1 : CVBS in, Audio L+R in |
PLEASE NOTE: This product will relay signals for content providers but will not operate the following:
- Remote Control IrDA signals of set top boxes providing NTL, Telewest cable TV services:
- Remote Control Signals of SKY set top boxes
|